Eco OBD OBD2 Economy Fuel Saver Tuning Box Chip For Petrol Car Gas Fuel Saving

£7.99

Description

Beware of many sellers selling fake cheap units, the fake units have a small circuit-board that lights a led on the unit, The do nothing else. 

Our units are the real thing, we are so confident that if you do not notice a difference after 60 days, simply return the unit to us for a instant no hassle refund.

Green Car Fuel saving Eco OBD II OBD2 Diesel Saver Auto Tuning Box Chip

Description:

OBD2 Diesel: Blue (Fuel saving)

Plug & Drive device Ready to function by increasing the economy of engine.

Easy to install. Just plug it into the OBD2 connector of cars. OBD2 fits all car from the year of 1996.

It works based OBD2 protocols by remapping the Car’s computer ECU. After driving 200 km road total, OBD2 adjusts itself to the car, according to the drivers’ habits and always keeps remapping the ECU to increase the performance of engine.

 

OBD2 is very easy to use.

Plug OBD2 into OBD2 connector of your car. And turn the ignition on for 30 seconds. And Turn the engine on.

OBD2 settings are optimal and the best for your car. Even the parameters are different for each vehicle, there might not be a need to make an additional adjustment. OBD2 will recognise your vehicle and your driving habits after around 200 km/150 miles driving, and then OBD2 adjusts itself to match your car perfectly.

OBD2 works on the basis of changing the signal form ECU. As a consequence, it changes the whole injection map.

The main difference between OBD2 Chip Tuning Box and Remapping tuning methods is that OBD2 Chip Tuning Box is easily removable,

and after unplug you go back to the factory settings. OBD2 is the cheap and safe type of tuning.

Remapping is a permanent change to your car. This is the expensive tuning and you cannot remove it.

OBD2 is equipped with the engine protection function and 100% safe for your car engine.

OBD2 produced on the printed circuit board in SMD technology. OBD2 Chip Tuning Boxes are high quality.

 

Installation and Calibration:

1 – Pull the Car Key out from the ignition.

2 – Find OBD2 connector(*) in your car and Plug in OBD2

3 – Insert the key into the ignition and twist the key to the first stage. (Do not start the car)

4 – Press the reset button for about 5 sec. After releasing the button, just wait for a while about 30-54 sec. (OBD2 will communicate and establish connection with ECU)

5 – Start up the engine.

6 – OBD2 will recognise your vehicle and your driving habits, after around 200 km/150 miles driving and thus OBD2 will adjust itself to match your car perfectly for more fuel saving.

 

Package Included:

1* OBD2 Chip Tuning Box Interface

1 * User Manual

Additional information

Weight .09 kg
Dimensions 10 × 6 × 2 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.